PeteP Well Known Member Nov 13, 2012 #1 I am wondering if most are triming the EGT and CHT wiring harness or leaving them full length and stowing the extra. I have read several articles and they seem to be about euually divided on if one should shorten the wiring harnesses.
I am wondering if most are triming the EGT and CHT wiring harness or leaving them full length and stowing the extra. I have read several articles and they seem to be about euually divided on if one should shorten the wiring harnesses.
R RetiredRacer Well Known Member Nov 13, 2012 #2 I cut mine to length. 160 hrs and they are still working fine.
R Rupester Well Known Member Nov 14, 2012 #3 I cut mine to length, based on the GRT/EIS4000 instructions which recommended same. They work fine.
N N316RV Well Known Member Nov 14, 2012 #4 Working on mine now - cutting to length Dynon says it is fine to cut harness to length.
Jeff R Well Known Member Nov 14, 2012 #5 My radio shop cut them to length, which concerned me, but at ambient they all read within a degree of each other.
My radio shop cut them to length, which concerned me, but at ambient they all read within a degree of each other.