bweiss
Well Known Member
I am about to mount my IO 360 ECI engine to an RV7A and wanted to know what size spacer is needed on the oilfilter to clear the mount. Recall that the ECI kit comes with the oil filter at a 45 degree cant.
Second question, the oil pressur tap is located such that it looks like it will interfere with the mount. Has anyone had to move the tap from the basic 45 degree position to face backwards with a straight fitting.
Thanks.
Second question, the oil pressur tap is located such that it looks like it will interfere with the mount. Has anyone had to move the tap from the basic 45 degree position to face backwards with a straight fitting.
Thanks.