W wilddog Well Known Member Jun 24, 2019 #1 Anyone installed an echoUAT with a Becker 4401-1 xponder? I need to know which pins on the Becker connect to the 3, 4, 5 pins on the echoUAT?
Anyone installed an echoUAT with a Becker 4401-1 xponder? I need to know which pins on the Becker connect to the 3, 4, 5 pins on the echoUAT?
jliltd Well Known Member Jun 24, 2019 #2 I have this configuration. The Echo is hard wired to a SkyFYX external GPS. The transponder code and altitude are read wirelessly from the Echo through the sniffing function. No wires used between the Echo and Becker. Works great. Jim
I have this configuration. The Echo is hard wired to a SkyFYX external GPS. The transponder code and altitude are read wirelessly from the Echo through the sniffing function. No wires used between the Echo and Becker. Works great. Jim
