DYNON Transponser 261 and ADSB 472
Approach Fast Stack made my wiring harness.
Set Transponder to Serial Port #1. (per Approach Fast Stack instructions)
Set ADSB 472 to Serial Port #3. (per Approach Fast Stack instructions)
Screen says Xponder Fail and ADS-B no radar.
Plane outside of hangar.
See 3 pics below.
I flipped the Serial Ports and the message on the screen changes to:
ADS-B In Offline
Xponder Fail
Thank you,
Approach Fast Stack made my wiring harness.
Set Transponder to Serial Port #1. (per Approach Fast Stack instructions)
Set ADSB 472 to Serial Port #3. (per Approach Fast Stack instructions)
Screen says Xponder Fail and ADS-B no radar.
Plane outside of hangar.
See 3 pics below.
![1.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F1.jpg&hash=a6d5dbf849e40c40625c86c8123b61cb)
![2.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F2.jpg&hash=593dc4aebf5a5bc829a05cf763f1cf43)
![3.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F3.jpg&hash=0389ab2205e7cb08594ec0d7b686d460)
![4.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F4.jpg&hash=d6b713438ec7cb8db1f2030632fb51d2)
![5.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F5.jpg&hash=6e642cb99d74adf5655c02d4844dfa83)
I flipped the Serial Ports and the message on the screen changes to:
ADS-B In Offline
Xponder Fail
![6.jpg](/community/proxy.php?image=http%3A%2F%2Fmybad.net%2FADSB%2F6.jpg&hash=20108df7daae99dcc03b39e2c050dd64)
Thank you,