Greetings,.
I have successfully connect the Dynon and Garmin. but according to this image below. If I connect GPS 175 pin 8 (yellow) with Resister to Transponder 261 pin 3 (yellow), Should my Garmin receive ADSB-in? Garmin is not showing ADSB-in information, only Dynon Skyview is. Also GPS 175 pin 51 (Green) does this pin need to be connected to something? Is it an active ground connect, (in-case you need a ground connection for wiring) or is this a non-active ground connect, and I am suppose to have this pin to a ground terminal somewhere.. Currently GPS 175 pin 51 (green) is not connected to anything.
![GPS-175-to-Dynon-SkyView-System-With-Config-2.jpg GPS-175-to-Dynon-SkyView-System-With-Config-2.jpg](https://vansairforce.net/data/attachments/45/45746-4858574c4df437a9f18764a5be9c9326.jpg)
I have successfully connect the Dynon and Garmin. but according to this image below. If I connect GPS 175 pin 8 (yellow) with Resister to Transponder 261 pin 3 (yellow), Should my Garmin receive ADSB-in? Garmin is not showing ADSB-in information, only Dynon Skyview is. Also GPS 175 pin 51 (Green) does this pin need to be connected to something? Is it an active ground connect, (in-case you need a ground connection for wiring) or is this a non-active ground connect, and I am suppose to have this pin to a ground terminal somewhere.. Currently GPS 175 pin 51 (green) is not connected to anything.
![GPS-175-to-Dynon-SkyView-System-With-Config-2.jpg GPS-175-to-Dynon-SkyView-System-With-Config-2.jpg](https://vansairforce.net/data/attachments/45/45746-4858574c4df437a9f18764a5be9c9326.jpg)