Don Patrick Well Known Member May 17, 2016 #1 I have a 70 amp alternator and have a D180 with the dynon shunt. I also have a ANL-60 protecting the layout....should I replace that with a ANL-80? Thanks Don
I have a 70 amp alternator and have a D180 with the dynon shunt. I also have a ANL-60 protecting the layout....should I replace that with a ANL-80? Thanks Don
M Mich48041 Well Known Member Friend May 17, 2016 #2 If I am reading THIS CHART correctly, an ANL-60 will never blow unless the current is above 100 amps. Based on that, I would not replace the fuse.
If I am reading THIS CHART correctly, an ANL-60 will never blow unless the current is above 100 amps. Based on that, I would not replace the fuse.
M Mich48041 Well Known Member Friend May 18, 2016 #4 I am going to post your question on the AeroElectric list to get a second opinion.
M Mich48041 Well Known Member Friend May 18, 2016 #5 Bob Nuckolls' reply . . . 60A will be fine. . . . . . , even an ANL50 would not be severely stressed by a 70A alternator . . . .Bob . . . Click to expand...
Bob Nuckolls' reply . . . 60A will be fine. . . . . . , even an ANL50 would not be severely stressed by a 70A alternator . . . .Bob . . . Click to expand...
