Just bought a new one...amazed that Dynon doesn't know the answers to my questions when I KNOW MANY RV's use their products. Betting BIG bucks many of you know the answers. Before I start, they told me all should work with D10, now that I have the unit, they do not really know??
1) Using a Slick Mag sensor from MicroSystems, will it work and, if so, which wire(s) are used on the sensor and which pins on D10).
2) Similar question on the fuel gages. I have standard Van's gages and want to use the D10. The Van's has three wires (G, I, S on gage), what pins do you use on the D10?
Again, I'm in amazement...they've been selling for ages and do not know this information...it boggles my mind....
Thanks
Dan
1) Using a Slick Mag sensor from MicroSystems, will it work and, if so, which wire(s) are used on the sensor and which pins on D10).
2) Similar question on the fuel gages. I have standard Van's gages and want to use the D10. The Van's has three wires (G, I, S on gage), what pins do you use on the D10?
Again, I'm in amazement...they've been selling for ages and do not know this information...it boggles my mind....
Thanks
Dan