yankee-flyer
Well Known Member
Tried to do an update to my D-180. According to Dynon, none of the airspeed calibrations I've done have worked because they fixed a bug in a later version than I have.
PROBLEM:: software available from Dynon is 5.6.0. Dynon is locked by Van's and needs to be unlocked before it can be updated.
The unlock file available from Van's is apparently good only through 5.5.
Any Thoughts??
Scott??
BTW-- 4-way box check shows Dynon IAS is low by 8 knots at cruise and 10 knots when it's indicating 60. Kinda make you float-- and I've been dropping 1 notch of flaps at what is really about 88 knots.
Wayne 120241
PROBLEM:: software available from Dynon is 5.6.0. Dynon is locked by Van's and needs to be unlocked before it can be updated.
The unlock file available from Van's is apparently good only through 5.5.
Any Thoughts??
Scott??
BTW-- 4-way box check shows Dynon IAS is low by 8 knots at cruise and 10 knots when it's indicating 60. Kinda make you float-- and I've been dropping 1 notch of flaps at what is really about 88 knots.
Wayne 120241