Set your idle speed higher something between 750-780 should take care of it.
With idle set at 650 rpm or slower, O-320 carburated RV-9A, engine dies just before plane rolls to a stop.
Engine runs great all other times.
Any suggestions to fix this?
Keep looking..... With a metal prop you should be able to idle down to 500 rpm with no problem. You might need to adjust the idle jet.
It idles fine at any low rpm until roll out after landing. I'll just keep goosing it a little after touchdown. Maybe it is loading up too much on final???
Thanks Sam. I'll try that too.
BTW, has anyone fabricated a device to adjust the idle mixture without removing the cowl on this bird?