[RudiGreyling]

Hi RVators,

On RV12 DWG 15-05 my highlighted number #6 rib W1208-R Un-Modified, the rear rib to L-spar attach flange holes don?t align with the spar holes.

All of the rest of the ribs fit fine...

Anybody else had the same problem?

Thanx
Rudi

 

[RudiGreyling]

Hi Gents,

Vans got back to me...
They say as long as the rib aligns for the skin, and the front of the ribs align...which it does, I should match drill this small miss-alignment through the back of the spar elongating the rib holes slightly. Then If I feel I need more I can drill a set of new holes through the spar centered between the current miss-aligned holes, and fit extra set of rivets.

Rudi