[fehdxl]

For dual Lightspeed Plasma III w/mini sensors on a six-cylinder the manual says the two sensors must be mounted 120 degrees apart, but it doesn't say 120 degrees in which rotation. Can anyone confirm this is correct? Thanks! -Jim

 

[fehdxl]

For the future reference, here's the reply from Klaus:

"It does not matter if the second sensor is at 120 or 240 degrees, the phasing procedure will assure that the sparks go to the right cylinders."

So the picture above will work fine. Also, if it's mounted at the 'other 120 degrees' it'll work as well.

Best,

-Jim