[petehowell]

Hey Gurus:

I'm wiring up my SL40 and GNS430 with a transmit select switch into my intercom (no audio panel). Can you guys tell me if I am on the right track? I was not sure if needed to switch the mic grounds or if they just all get tied together. All wires will be shielded.

TIA

 

[fmarino1976]

Suggestion

I'm not familiar with that mixer, but if you have an extra input, you might want to consider adding a on/off/on switch so you could monitor the audio of the com not selected to transmit.

 

[petehowell]

Thanks Freddy

Good suggestion - I might just mix all the comm audio. I have an SL-40 with a 2nd channel monitor that will be the primary - the 430 com will be backup