gabbiesrv7a
Member
BUMMER, I did the unthinkable even after measuring and futzing and what i thought was aligning the rear spar forks with the rear spar of the wing. Drilled way off the mark and now dont have 5/8 inch clearance (left wing). Called Vans, and they suggested sending a couple of pics, but worst case I will need to replace the 705B (center section bar) and the Left 605C (bar doubler). Anyone put themselves in this predicament and any "easy" way or miracle fixes to get out of this, or is this one of those, bite the bullet, and redo the whole rear spar assembly things. Oh my aching head and back! thanx.
Keep on keepin' on, gary
Keep on keepin' on, gary
Last edited: