[Av8torTom]

I'm putting together my stall warning and it calls for enlarging two holes with a #31 drill bit - really???? Then I see the slot for the stall warning vane is made with a #10 bit. Does anyone know where I can get a #ed drill bit set?

Thanks,

Tom

 

[jsharkey]

McMaster Carr
Avery Tool

 

[Vlad]

Hangar #3

 

[Av8torTom]

Wanna sell it???

Vlad, want to sell it to me???

 

[Vlad]

Niet, come and take tank test kit and two bits you need 31 and 10 no return.

 

[Av8torTom]

Da!!!

Thanks Vlad - will you be there this week?

 

[Vlad]

Thanks Vlad - will you be there this week?

Briefly tomorrow during the day. Sat morning from 8am, Columbus day around 10am.

 

[GAHco]

Easy Stuff!

I'm putting together my stall warning and it calls for enlarging two holes with a #31 drill bit - really???? Then I see the slot for the stall warning vane is made with a #10 bit. Does anyone know where I can get a #ed drill bit set?

Thanks,

Tom

We stock and sell all the #'d drill bits.

Here are the reference pages.

http://www.gen-aircraft-hardware.com/images/pdf/drills.pdf

If you are not familiar with our Webstore, please read the Website tips first.

 

[DaAV8R]

Don't do it

I couldn't figure out why the slot would need to be anywhere near #10 in width. I stopped at about #16 and I wish I had stopped at about #21. All we should need here is a slot wide enough to allow activation of the microswitch. At #10 we will need to put a screen on the hole to keep the sparrows out

Maybe I'm missing something, but I can't see it if I am.

 

[Av8torTom]

Found a good source

yardstore.com
Bit set: #1-60
$41.00