aarvig
Well Known Member
Hey guys, I sent this to Vans but I thought I would put it out there to get the general opinion on this.
Tonight while drilling the #19 screw holes in the fuel tank skin for the dimpled holes that go into the wing spars I had a drill bit go wild on me and cause this nasty hole. The hole will be dimpled but its definitely bigger and more oddly shaped then it should be. What should I do?
Tonight while drilling the #19 screw holes in the fuel tank skin for the dimpled holes that go into the wing spars I had a drill bit go wild on me and cause this nasty hole. The hole will be dimpled but its definitely bigger and more oddly shaped then it should be. What should I do?
![DSC_0001-5.jpg](/community/proxy.php?image=http%3A%2F%2Fi634.photobucket.com%2Falbums%2Fuu64%2Faarvig%2FDSC_0001-5.jpg&hash=bc7705b5b45026326e95031158df00ab)
![DSC_0002-4.jpg](/community/proxy.php?image=http%3A%2F%2Fi634.photobucket.com%2Falbums%2Fuu64%2Faarvig%2FDSC_0002-4.jpg&hash=ea46f35e67d90f5c2f7ce566818222a4)