eric_marsh
Well Known Member
I picked up a RV-6 kit from a fellow in California last week and am now in the process of inventorying everything. There's a couple of things that I've not been able to identify and I thought that if I posted pictures here someone might recognize them.
The first is four pieces of sheet metal 48" tall. They are marked left bottom, left top, right bottom and right top. Two of the pieces have a tab that makes me think they are supposed to be bent to a rounded edge. I thought they might be elevators but they don't seem to be the same as what the plans show.
The first picture is these pieces uncut and the second is the same pieces (but the other side) with the bottom cut at an angle.
The third picture is a piece of metal 44.5 inches tall that has a bend on each end.
Ideas anyone?
The first is four pieces of sheet metal 48" tall. They are marked left bottom, left top, right bottom and right top. Two of the pieces have a tab that makes me think they are supposed to be bent to a rounded edge. I thought they might be elevators but they don't seem to be the same as what the plans show.
The first picture is these pieces uncut and the second is the same pieces (but the other side) with the bottom cut at an angle.
The third picture is a piece of metal 44.5 inches tall that has a bend on each end.
Ideas anyone?
![rv-sheetmetal2.jpg](/community/proxy.php?image=http%3A%2F%2Fhomepage.mac.com%2Femarsh%2F.Pictures%2Frv-sheetmetal2.jpg&hash=7d41d431a6c3b89c79c9e37bbc836a1a)
![rv-sheetmetal1.jpg](/community/proxy.php?image=http%3A%2F%2Fhomepage.mac.com%2Femarsh%2F.Pictures%2Frv-sheetmetal1.jpg&hash=442e33443ffbe923e40456f31a9c8edc)
![rv-sheetmetal3.jpg](/community/proxy.php?image=http%3A%2F%2Fhomepage.mac.com%2Femarsh%2F.Pictures%2Frv-sheetmetal3.jpg&hash=b68fae53b95d4571f492937f8839d8e2)