Saville
Well Known Member
Hi all,
I have a small tire pump I use to inflate my tires (cars, airplanes, bikes wheelbarrow etc). At the end of the hose is a "locking schrader valve" - the type you see on most bicycle pumps.
But I also have a Cleaveland Aircraft Valve Stem Inflation Tool:
http://www.cleavelandtool.com/Cleaveland-Valve-Stem-Inflation-Tool/productinfo/VSI50/#.Woxs8IJG3ow
Which says it has a 1/4" FPT connector on the inlet.
My life would be made much simpler if there existed an adapter that would take me from a locking Schrader to this 1/4" FPT on the Cleaveland tool.
Does such a thing exist?
Thanks!
I have a small tire pump I use to inflate my tires (cars, airplanes, bikes wheelbarrow etc). At the end of the hose is a "locking schrader valve" - the type you see on most bicycle pumps.
But I also have a Cleaveland Aircraft Valve Stem Inflation Tool:
http://www.cleavelandtool.com/Cleaveland-Valve-Stem-Inflation-Tool/productinfo/VSI50/#.Woxs8IJG3ow
Which says it has a 1/4" FPT connector on the inlet.
My life would be made much simpler if there existed an adapter that would take me from a locking Schrader to this 1/4" FPT on the Cleaveland tool.
Does such a thing exist?
Thanks!