C-FAH Q
Well Known Member
I realize that many of you have purchased your RV and the service bulletins that have surfaced in the last year or so may be beyond your comfort level in performing yourself, or even if you have built the plane, you may not have the time or tools available anymore to complete them.
This is where I may be of service. I would do your service bulletins to the horizontal stab and elevators (6,7,8)or nose gear of the RV10. All items would be dual inspected and signed off by a Canadian AME ( I am located in St.Thomas, Ontario. CYQS). If you require any other work,( Annual inspection, repairs or just a good going over) this could be completed at this time. Some of you may wish to remove and install the tail section yourself and just have me complete the modifications. I am open to any and all work you would like.
Contact me at [email protected] and let me know how I can help.
This is where I may be of service. I would do your service bulletins to the horizontal stab and elevators (6,7,8)or nose gear of the RV10. All items would be dual inspected and signed off by a Canadian AME ( I am located in St.Thomas, Ontario. CYQS). If you require any other work,( Annual inspection, repairs or just a good going over) this could be completed at this time. Some of you may wish to remove and install the tail section yourself and just have me complete the modifications. I am open to any and all work you would like.
Contact me at [email protected] and let me know how I can help.
Last edited:
