HFS
Well Known Member
This tool gets used for smoothing the edges of a lot more sheet metal parts than just those airplane related.
2 - 6 x 2 ScotchBrite wheels. 1 - Medium & 1 - Fine
Regular on/off switch as well as a momentary foot control - for those "mini" jobs.
A polishing wheel (resting in pocket in frame) can be installed when shining up stainless screws, etc.
3/4 HP x 3450 rpm motor, geared down to 1700 arbor speed (already had motor on hand, o/w would have used 1725 rpm motor.
On a rolling stand that can be locked in position.
HFS
Don't know why it shows up on its side - in the file downloaded it was upright?
2 - 6 x 2 ScotchBrite wheels. 1 - Medium & 1 - Fine
Regular on/off switch as well as a momentary foot control - for those "mini" jobs.
A polishing wheel (resting in pocket in frame) can be installed when shining up stainless screws, etc.
3/4 HP x 3450 rpm motor, geared down to 1700 arbor speed (already had motor on hand, o/w would have used 1725 rpm motor.
On a rolling stand that can be locked in position.
HFS
Don't know why it shows up on its side - in the file downloaded it was upright?