HFS
Well Known Member
Here is a simple and effective way to drain the residual oil out of the filter at oil change - best for horizontal installations. Not so much otherwise.
If installed and used correctly there will be no "drips" when removing the filter - just have an adequate length drain period. Also makes a difference whether the oil is warm/hot or cold.
I have printed instructions for its use, but the file is "invalid" as an attachment - but it's pretty straight forward.
YMMV - and probably will
The 90* elbow is to miss the FW "shelf" on -4's & Rockets - o/w if there is enough clearance, a straight fitting (much simpler to make) works just as well.
If installed and used correctly there will be no "drips" when removing the filter - just have an adequate length drain period. Also makes a difference whether the oil is warm/hot or cold.
I have printed instructions for its use, but the file is "invalid" as an attachment - but it's pretty straight forward.
YMMV - and probably will
The 90* elbow is to miss the FW "shelf" on -4's & Rockets - o/w if there is enough clearance, a straight fitting (much simpler to make) works just as well.
Attachments
Last edited: