AcezHi Active Member Jul 7, 2009 #1 Does any one sell a set that includes all of the required pieces needed for an RV9? I bought a CP 0214 and now I need the sets. Thanks
Does any one sell a set that includes all of the required pieces needed for an RV9? I bought a CP 0214 and now I need the sets. Thanks
Shockwave Well Known Member Jul 11, 2009 #2 The most complete set I know of is Cleaveland's. It has some larger round rivet sets I doubt I'll need, but no tank dies.
The most complete set I know of is Cleaveland's. It has some larger round rivet sets I doubt I'll need, but no tank dies.
F FredMagare Well Known Member Jul 11, 2009 #3 Everything... ...you need can be found at this link: http://www.averytools.com/c-17-dimple-dies.aspx I recommend the dimple set plus the tank dies (sold seperately). In addition, I'd recommend two of their 1/16" mini (3/8") squeezer sets. http://www.averytools.com/pc-877-18-small-flush-squeezer-sets--38-dia.aspx Of course you need yokes: http://www.averytools.com/c-15-yokes.aspx and quick change pins help: http://www.averytools.com/p-473-quick-change-yoke-pins-for-avery-hand-and-pneumatic-squeezers.aspx I have three yokes and so bought two pneumatic squeezers that I can keep ready with the two yokes I'm using most. (I figure I can sell one later and recoup a good portion of my investment.) I hope this helps.
Everything... ...you need can be found at this link: http://www.averytools.com/c-17-dimple-dies.aspx I recommend the dimple set plus the tank dies (sold seperately). In addition, I'd recommend two of their 1/16" mini (3/8") squeezer sets. http://www.averytools.com/pc-877-18-small-flush-squeezer-sets--38-dia.aspx Of course you need yokes: http://www.averytools.com/c-15-yokes.aspx and quick change pins help: http://www.averytools.com/p-473-quick-change-yoke-pins-for-avery-hand-and-pneumatic-squeezers.aspx I have three yokes and so bought two pneumatic squeezers that I can keep ready with the two yokes I'm using most. (I figure I can sell one later and recoup a good portion of my investment.) I hope this helps.
E EBSB52 I'm New Here Aug 9, 2009 #4 dimple dies needed I have a set of 24 dies. They can be seen here: http://www.atitools.com/2009catalogpdfs/ATI_Dimpling_Alum_2009.pdf or I can send you several pics of mine. Ed 480-215-8461
dimple dies needed I have a set of 24 dies. They can be seen here: http://www.atitools.com/2009catalogpdfs/ATI_Dimpling_Alum_2009.pdf or I can send you several pics of mine. Ed 480-215-8461