ronshort2000
Member
I was working on my -10 VS last night and got to a step where I needed to drill a #19 hole and countersink for a #8 bolt. I bought my tool set from Cleveland so I got my #8 CS and the pilot would not fit into the hole. I fiddles with it for a while and looked up the CS on Cleveland's web site. They state "CC8 - #19 drill size for #8 or 8-32 screw - Pilot size 0.166". I measured the pilot on MY CS and it was .197 . Could be a manufacturing error but was curious if anyone else has run into an issue like this. If it was a Mfg error I'd be surprised if I have the only bad one. For all I know it is something I am doing wrong.
I contacted Cleveland and waiting for a response but wanted to ping the group.
I contacted Cleveland and waiting for a response but wanted to ping the group.
![showmy.php](/community/proxy.php?image=https%3A%2F%2Feaabuilderslog.org%2Fshowmy.php%3Fp%3D7kIC2Wd6Y%26z3%3D%26i%3D5630722%26l%3D70318%26t%3Df%26f%3D20210523_183708.jpg&hash=c1a253e0f489879f235952a25ea359c4)