E. D. Eliot
Well Known Member
I'm interested to know what you have found the measurement between the front of the cowl and the rear of the spinner to be. I suppose that this will be self evident when I get there in the cowl assembly but I am just curious. I'll be there tomorrow.
By the way, I am blown away by the fit that is produced by exactly following the instructions for cutting and sanding the edges of the cowl down to the scribe lines in the instructions. Wish that the scribe lines were a little more prominent though.
I believe that the cowl can be trimmed - fit in place and anchored to the piano hinges in the span of about 6 hours. Just amazing. Takes two people to do it easily.
Thanks for answering
By the way, I am blown away by the fit that is produced by exactly following the instructions for cutting and sanding the edges of the cowl down to the scribe lines in the instructions. Wish that the scribe lines were a little more prominent though.
I believe that the cowl can be trimmed - fit in place and anchored to the piano hinges in the span of about 6 hours. Just amazing. Takes two people to do it easily.
Thanks for answering
Last edited: