Initial test of the left fuel tank has passed.
The Float access plate was tested with the cork gasket installed. Now that the initial test was a success, I'll pull the plate, remove the cork gasket, pro seal up the plate, reinstall and retest.
The multimeter is measuring ambient temperature for a reference as I recorded pressures during the test.
During the test I used a leak test fluid to check all the seams and rivets.
The Float access plate was tested with the cork gasket installed. Now that the initial test was a success, I'll pull the plate, remove the cork gasket, pro seal up the plate, reinstall and retest.
The multimeter is measuring ambient temperature for a reference as I recorded pressures during the test.
During the test I used a leak test fluid to check all the seams and rivets.
![lh-tank-1.jpg](/community/proxy.php?image=http%3A%2F%2Fmyplace.frontier.com%2F%7Etokosha%2Frv7%2Fvaf%2Flh-tank-1.jpg&hash=29ae0b4088a046ada99f7f7ef6d01956)
![gauge1.jpg](/community/proxy.php?image=http%3A%2F%2Fmyplace.frontier.com%2F%7Etokosha%2Frv7%2Fvaf%2Fgauge1.jpg&hash=5680aff5e56680b1e65ace9a940af16c)