[clevtool]

"Airventure" has expanded into our booth space again this year causing us to relocate. We will now be located in the North Aircraft Display area near Van's tent. We decided if we had to move, we might as well be at ground zero for kitbuilders. Follow this link for a map of the site. http://www.cleavelandtoolstore.com/oshkosh2010.htm

Cleaveland will be debuting a new pneumatic rivet squeezer at the show, stop by and check it out!!! See a teaser at:
http://www.youtube.com/watch?v=8QEeQNec13g

We are going to be "tweeting" at Oshkosh with news and specials.
Follow us at:
http://twitter.com/@clevtool

If you are a Facebook user please 'like' our page and then share with your 'friends' at:
http://www.facebook.com/pages/Boone-IA/Cleaveland-Aircraft-Tool/141409639203392?v=wall

 

[mcencula]

Nice!

Awesome. I'm guessing that works in a similar fashion to the Pressotechnik hydro-pneumatic cylinders. If so, you gain the benefit of both low force approach mode as well as high force squeezing action.

Can't wait to see it in person!

Nearly my entire tool set is from Cleveland and I couldn't be more pleased with the quality of the tools or the results they produce.

 

[clevtool]

Similar, but not quite that complex, or heavy!

Thanks Mike for your help with our hand squeezer. Since we have adopted your parts we have had zero repairs on the tool!