[rph142]

Just curious, how much did your catto repitch cost?

 

[Mark Albery]

$350 total on a 3-blader and he even included painting the spinner to match.

That was to coarsen it by a good 100 RPM. Going fine is easier according to Craig, but the same cost I believe.

 

[moll780]

I think it was 110 or so for shipping my 2 blade back and forth and he didnt charge for the re-pitch.

Just curious, how much did your catto repitch cost?

 

[Mark Albery]

I believe Craig will do one re-pitch FOC if you buy one of his props.

He likes to have happy customers!

 

[edneff]

I did not know the prop could be repitched. I have a 3 blade w/ NLE on my RV7... Has anybody had one of these repitched?

 

[cubdriver]

Catto

Yes, My NLE was recently re-pitched. Not sure how he did it but it turned out perfect.

 

[AX-O]

Yes, My NLE was recently re-pitched. Not sure how he did it but it turned out perfect.

He basically changes the profile of the airfoild by adding glass to the original blade.

 

[rph142]

It looks like mine was 350. He added a few stips of carbon to the underside of the trailing edge. The cord length is slighly (1/8-1/4") longer as a result. If you havent been to his shop lately I highly recommend it. He is building carbon fiber wings for a few reno racers.