I'm having a problem with the air box top plate hitting against the conical brace on the rear left side. It won't fit flush with the VA-130C mount plate when the bolts go through from the air box top plate, filter, filter plate and the air box top plate. The Mount Plate is flush againt the rear lip of the air box top plate.
My engine is Lycoming 0320 B2C and the carbirator is a one piece CFH-98001 Model 45PA all one unit.
Any Suggestions?
Thanks,
Chuck May
My engine is Lycoming 0320 B2C and the carbirator is a one piece CFH-98001 Model 45PA all one unit.
Any Suggestions?
Thanks,
Chuck May
Last edited: