[Rick_A]

Where can I get the tab type lock washers used to mount the FAB plate to the carb?

They have a long tab section the goes over the edge of the FAB plate at the throat of the carb and little tabs that are bent down after the bolt is tight.

 

[AMURRAY]

I have a set if you want them. I drilled the heads of the bolts and safety wired them, so I won't be needing the washers.

 

[Rick_A]

Thanks

Thanks for the offer. I sent you an email with my address.

 

[Brantel]

My FAB kit came with predrilled bolts for safety wire....

 

[JonJay]

Philister Head Screws

they are drilled and work great. you can then safety wire

 

[szicree]

A significant problem with the tabbed washers are that they are not really reusable. You probably won't have to take the FAB off very often, but if you do it would suck to have to order new washers. Vans does stock the drilled bolts for this purpose. I think the part number is simply 1/4-20 drilled bolt.