[guccidude1]

Guys: I managed to boorger up the socket head shouldered bolt that holds the brake mounting flange to the gear leg on my RV-9A. Who would have thought that is has course threads, well the threads are not course anymore, they are non-existant. Does anyone know what the part number is, I can't find it anywere on the digtal drawings or Van's "the list". Thanks, Dan

 

[mikehoover]

Is it described on DWG C2, VIEW F-F? Looks like a 5/16-20 X 1 1/2 "screw". I will look at mine tomorrow and see what is actually there.

 

[AF_Alan]

Bolt thru leg

Do you mean the single bolt through the gear leg; left side of drawing C2?

That is 5/16" (20 threads per inch) x 1-1/2" long. Found in Van's catalog under "screws" ...naturally

SCREW 5/16-20X1 1/2 $2.00 ea


Good Luck!

 

[guccidude1]

Thanks guys: I found the C2 drawing and the bolt (screw) description and was looking for a part number to order. I'll call tomorrow and get a couple with course thread nylock nut. Thanks again, Dan