Hello, All, I'm on page 34-03, Step 3 where it tells me to "adjust/bend" the bow so there is 7/16" between it and the instrument panel. Most of the bow is 9/16" away. It wants to move toward the panel as I pull on it and then go back to the original position-9/16" away. Two things: 1. It occurs to me that an 8th of an inch doesn't matter or 2, that I could make a hook out of a clothes hanger that would catch the underside of the bow and underside of the instr. panel. This hook would pull the bow up to 7/16". I would then fit/drill the canopy, letting the canopy hold the bow at 7/16". What is your best suggestion? Thanks, Ken