Have the slider canopy cut and clecoed to the frame and the windshield fitted to roll bar, fit is good at the top and the lower sides but at the 2 and 10 oclock positions the canopy is about 1/4 inch inside the windscreen.
The canopy rolls OK and the side rails are parallel to the fuselage deck.
Looks like when I tweaked the frame I changed the shape so it does not quite match the roll bar and the threads here suggest tweaking after the frame is drilled is asking for trouble.
So the question is should I live with it as it will be hidden under the fiberglass strip and move on or should I order a new canopy frame.
The canopy rolls OK and the side rails are parallel to the fuselage deck.
Looks like when I tweaked the frame I changed the shape so it does not quite match the roll bar and the threads here suggest tweaking after the frame is drilled is asking for trouble.
So the question is should I live with it as it will be hidden under the fiberglass strip and move on or should I order a new canopy frame.