[Bob Ross]

Has anyone used an aluminum skin as a substitute for the 10 ply epoxy/glass canopy fairing we are instructed to fabricate?

The canopy lay up is my next task. I am not looking forward to this so if an aluminum piece has been used here successfully I am all for it

Thanks All

Bob

 

[Geico266]

The fiberglass layup turned out to be a non event. If you have gone this far making the fiberglass layup for the canopy is no big deal. Follow the insturctions and you are good to go.

 

[Alschief]

Windshield Fairing

See the attached link for a pre-made fiberglass fairing.
Trim and glue in-place.

http://www.shop.vikingaircraftengines.com/Other-Parts-for-your-Engine-Airplane_c6.htm

 

[Dave12]

I have seen the prefab windshield fairing and was not very impressed. It is very thin and IMO, flimsy. Once I saw it, I was glad I chose to do the layup. As Geico said, it's a non-issue. Just stop thinking about it and do it. I think you will surprise your self.

 

[Andy J]

I enjoyed the canopy layup. It was a nice break from the aluminum and I felt good about actually making something instead of simply assembling. It was satisfying for me. Follow the plans and I bet you will do fine.