bobmarkert
Well Known Member
I’m deep into my panel build and need a second opinion. Garmin G3X is primary with a Dynon D6 backup. The Dynon install manual says the remote compass module (EDC-D10A) must be aligned in pitch within 1 degree of the D-6 in the instrument panel. That means I need to build a mount with an 8 degree tilt to match the panel tilt. My avionics shop said to skip that and just mount the remote compass flat without building an 8 degree bracket to align the tilt. He says it will be accurate enough. I’m sure there are a lot of opinions out there but I’m asking if anyone has any actual experience with skipping the tilt alignment step for the compass module and what (if any) are the effects on accuracy.
Thank you
Bob
Thank you
Bob
Last edited: