P petersb Well Known Member Jul 18, 2014 #1 My HXr altimeter shows 50 feet low. The calibration page shows a. Bias and scale factor options plus initiation . Unfortunately there is little literature for these settings . Anyone know how to do it?
My HXr altimeter shows 50 feet low. The calibration page shows a. Bias and scale factor options plus initiation . Unfortunately there is little literature for these settings . Anyone know how to do it?
RV8iator Well Known Member Benefactor Jul 18, 2014 #3 Refer to chapter 9 in the HS HX user guide. Full explanation on how to do it. It's on the GRT website under the support, documentation tab. Horizon HX-HS-WS Pilot?s Guides
Refer to chapter 9 in the HS HX user guide. Full explanation on how to do it. It's on the GRT website under the support, documentation tab. Horizon HX-HS-WS Pilot?s Guides
P petersb Well Known Member Jul 18, 2014 #4 RV8iator said: Refer to chapter 9 in the HS HX user guide. Full explanation on how to do it. It's on the GRT website under the support, documentation tab. Horizon HX-HS-WS Pilot’s Guides Click to expand... Will Check the HX manual, thanks Last edited: Jul 18, 2014
RV8iator said: Refer to chapter 9 in the HS HX user guide. Full explanation on how to do it. It's on the GRT website under the support, documentation tab. Horizon HX-HS-WS Pilot’s Guides Click to expand... Will Check the HX manual, thanks
T tim2542 Well Known Member Jul 18, 2014 #5 Pitot Static Isn't that a job for the pitot static test guy? Mine did it for me, took him just a few seconds to drill into the menu and find it. Tim
Pitot Static Isn't that a job for the pitot static test guy? Mine did it for me, took him just a few seconds to drill into the menu and find it. Tim