WingnutWick
Well Known Member
Hello all,
I am changing out my girlfriend's RV-6As throttle cables as the previous ones were unacceptable bowden type coming from a throttle quadrant and wrapping around the carb to have the correct movement. Very dubious.
I have removed the quadrant and putting in standard push-pull type controls from Vans. I have the old b bulkhead cable safe locks that were used on the other cables but they are too small, especially to fit around the threaded end that has to pass through the firewall.
What is the standard equipment to use for passing these through the firewall?
Thank you!
Wingnut
I am changing out my girlfriend's RV-6As throttle cables as the previous ones were unacceptable bowden type coming from a throttle quadrant and wrapping around the carb to have the correct movement. Very dubious.
I have removed the quadrant and putting in standard push-pull type controls from Vans. I have the old b bulkhead cable safe locks that were used on the other cables but they are too small, especially to fit around the threaded end that has to pass through the firewall.
What is the standard equipment to use for passing these through the firewall?
Thank you!
Wingnut