D Danflyboyman Member Patron Sep 28, 2023 #1 any suggestions on building the fuselage, use the book? build the bulkheads first? ....
D David Paule Well Known Member Sep 28, 2023 #2 Which airplane? In general, follow the manual, understand every drawing and step before you begin. Deburr all the parts. Dave
Which airplane? In general, follow the manual, understand every drawing and step before you begin. Deburr all the parts. Dave
rockwoodrv9 Well Known Member Patron Sep 28, 2023 #3 Come look at KTEW Dan, if you can get down to KTEW below Lansing, you can see a finished 14A, 9A, and a 9A under construction. One of us is there most days.
Come look at KTEW Dan, if you can get down to KTEW below Lansing, you can see a finished 14A, 9A, and a 9A under construction. One of us is there most days.
wirejock Well Known Member Sep 28, 2023 #4 Fuse Danflyboyman said: any suggestions on building the fuselage, use the book? build the bulkheads first? .... Click to expand... If it's a 7(A), yes. Manual has you assemble bulkheads first. Follow the manual.
Fuse Danflyboyman said: any suggestions on building the fuselage, use the book? build the bulkheads first? .... Click to expand... If it's a 7(A), yes. Manual has you assemble bulkheads first. Follow the manual.
nohoflyer Well Known Member Patron Sep 29, 2023 #5 The manual is a good start pretty much through flipping the canoe. There is some critical thinking required afterwards based upon mods you wish to incorporate.
The manual is a good start pretty much through flipping the canoe. There is some critical thinking required afterwards based upon mods you wish to incorporate.
