[Ultra]

Gday, i need to find a supplier of T bushings to the dimensions of the image below.

I have seen a post here a while ago that linked to a supplier of various types of these bushings but i can no longer find it. , oh, and sadly they are not for an RV aircraft, though i do have a RV-10 SB kit on the way.

Thank you in advance.

Sadly i have been searching all over Australia for a supplier, but some will manufacture such parts for an extremely high cost..

 

[mike newall]

I would suggest another drawing in Imperial may be of help.

Search the McMaster Carr website.

 

[deek]

Not knowing your application it's hard to advise, but if the stresses are low sintered oilite bushings are cheap and easy to find; even Spruce sells 'em.

http://www.aircraftspruce.com/catalog/hapages/flangedbushings.php

 

[647jc]

Symmco has a good selection of bearings/bushings http://www.symmco.com/stockbearingscat.html . Checkout their "bronze flanged bushings" .

 

[Noah]

IGLIDE

IGUS has a nice commercial off the shelf selection, not exactly close to you, but they may have Australia distribution:
http://www.igus.com/iglide

 

[Ultra]

thanks for the links. much appreciated, oh, and the bushings are required for a 1000hrly overhaul in a ICP Savannah, flight control hinge points.