Long story short, this is my second set of RV14 wings. I remember the first time trying to rivet around the flap hinge. Not easy.
I fabricated a custom rivet set by welding a flush set to a curved set, then ground a side off of the head. This allowed me to get nice and close to the flap hinge.
https://youtu.be/YTMZ86CNTCI
I fabricated a custom rivet set by welding a flush set to a curved set, then ground a side off of the head. This allowed me to get nice and close to the flap hinge.
https://youtu.be/YTMZ86CNTCI
