J Joe Casey Member Sep 19, 2009 #1 what is the best tool or process to put a blind, flush rivet dimple in the fuse or firewall? Joe Casey RV-9
what is the best tool or process to put a blind, flush rivet dimple in the fuse or firewall? Joe Casey RV-9
F fehdxl Well Known Member Sep 19, 2009 #2 Pop rivet dimpler? http://www.averytools.com/p-857-pop-rivet-dimplers.aspx Hope that helps. -Jim
mikehoover Well Known Member Sep 19, 2009 #3 Here's what I did: http://www.aclog.com/rv-9a/images/Fuselage/2245506b618d937667ec33f94487314319186_DSC_0585.JPG
Here's what I did: http://www.aclog.com/rv-9a/images/Fuselage/2245506b618d937667ec33f94487314319186_DSC_0585.JPG
longranger Well Known Member Sep 19, 2009 #4 Or these... http://www.averytools.com/pc-617-19-dimpling-riveting-block-set.aspx with appropriate dies and a rivet gun.
Or these... http://www.averytools.com/pc-617-19-dimpling-riveting-block-set.aspx with appropriate dies and a rivet gun.
Jamie Aust Well Known Member Sep 19, 2009 #5 mikehoover said: Here's what I did: http://www.aclog.com/rv-9a/images/Fuselage/2245506b618d937667ec33f94487314319186_DSC_0585.JPG Click to expand... LOL , Mike...... DONT MISS
mikehoover said: Here's what I did: http://www.aclog.com/rv-9a/images/Fuselage/2245506b618d937667ec33f94487314319186_DSC_0585.JPG Click to expand... LOL , Mike...... DONT MISS
N niblettda Well Known Member Sep 20, 2009 #6 See, now that's exactly the solution I would have come up with too!