[AX-O]

The instructions say to bevel the inboard and aft edges of E713 locally where E713 overlaps the spar and the rib flanges to provide a smooth transition between E713 and E701R. What is Beveling? Does anyone have pics of what this is supposed to look like? Thanks for any help.

 

[briand]

Basically angle the edge on the e713 that is under the 701 skin so there is less of a bump. It does help a little but you'll still see a slight bulge under the 701. I figure even if it is visually no better after beveling, it at least should help reduce that area from being stressed and cracking.