J JDA_BTR Well Known Member Apr 20, 2018 #1 That lower left nut seems nearly impossible. Gonna have to take off the right mag to reach it. Even then looks tough. Anybody got a fav tool that made it easier?
That lower left nut seems nearly impossible. Gonna have to take off the right mag to reach it. Even then looks tough. Anybody got a fav tool that made it easier?
rvbuilder2002 Legacy Member Mentor Apr 20, 2018 #2 http://www.aircraftspruce.com/catal...XYDbdP17dpMI2MxwSev40CPcNS8XFefkaAg_PEALw_wcB
J JDA_BTR Well Known Member Apr 20, 2018 #3 I like it. Not sure if it is wide enough to get around the alternator?
MED Well Known Member Friend Apr 20, 2018 #4 I was able to reach it after removing the right e-mag. Used an open-end wrench, but had to guesstimate the torque comparing it to the other three.
I was able to reach it after removing the right e-mag. Used an open-end wrench, but had to guesstimate the torque comparing it to the other three.
