Guilhermepilot Well Known Member Jan 22, 2015 #1 After have my Ff pretty much done I found my batt to closse to my slick magneto, there is about one inch between them! Is it a problem? Thanks I use a yuasa same simension of a pc680 Last edited: Jan 22, 2015
After have my Ff pretty much done I found my batt to closse to my slick magneto, there is about one inch between them! Is it a problem? Thanks I use a yuasa same simension of a pc680
Jesse Well Known Member Jan 22, 2015 #2 An inch should be adequate clearance. Just make sure the cables are well clear of the mag.
Guilhermepilot Well Known Member Jan 22, 2015 #3 Thanks jesse I was very afraid to make another hole Om my Firewall besides the batt is atached on reiforcemts of it
Thanks jesse I was very afraid to make another hole Om my Firewall besides the batt is atached on reiforcemts of it
Walt Well Known Member Jan 22, 2015 #5 Don't forget about maintenace, you will have to pull that mag at some point and the engine does move around a fair bit.
Don't forget about maintenace, you will have to pull that mag at some point and the engine does move around a fair bit.
Guilhermepilot Well Known Member Jan 23, 2015 #6 I put a bolted box so removing 4 bolts the box will came out P mags bucket List!!!!!!!!! tom