jdeas Well Known Member May 26, 2009 #1 I have finally obtained all my avionics gear and need to start building the enclosure behind the control panel. Can anyone suggest what gauge aluminum I should start with for the side panels?
I have finally obtained all my avionics gear and need to start building the enclosure behind the control panel. Can anyone suggest what gauge aluminum I should start with for the side panels?
Craig23 Well Known Member May 26, 2009 #2 Enclosure? Do you mean something other than the trays the avionics come with?
K Kyle Boatright Well Known Member May 26, 2009 #3 I suggest some extruded angle to support the avionics trays. An enclosure would restrict cooling airflow, which would be a bad thing.
I suggest some extruded angle to support the avionics trays. An enclosure would restrict cooling airflow, which would be a bad thing.
az_gila Well Known Member May 27, 2009 #4 3/4 by 0.063 angle... Kyle Boatright said: I suggest some extruded angle to support the avionics trays. An enclosure would restrict cooling airflow, which would be a bad thing. Click to expand... ...stock works well, at a mere $3 a foot from AC $pruce....
3/4 by 0.063 angle... Kyle Boatright said: I suggest some extruded angle to support the avionics trays. An enclosure would restrict cooling airflow, which would be a bad thing. Click to expand... ...stock works well, at a mere $3 a foot from AC $pruce....