AAflyer
Well Known Member
Van's baffling kit includes some stock steel rod, that I carefully cut to length, and bent to shape, only to find it impossible to thread the ends with my tap and die set.
Can anyone talk me out of using the nice threaded rod available at the hardware store? Zinc-coated steel. Bends easier, so I know it's not as hard, but rated for 200# Safe Working Load. Seems to good to be true at $0.80 each.
Can anyone talk me out of using the nice threaded rod available at the hardware store? Zinc-coated steel. Bends easier, so I know it's not as hard, but rated for 200# Safe Working Load. Seems to good to be true at $0.80 each.