[Ron B.]

Wow, now this task is much faster than the RV-10. At a few minutes to lunch time break I finished the baffles. Next step was the baffle seals. I sneaked a peak at my next task after lunch and before quitting for lunch, almost all the seals were clecoed in place. I probably spent a day or more on the RV-10 to get to that point.
Thanks Van's

 

[MLock]

I told you guys this was gonna be easy!

 

[Ron B.]

They are all riveted in place. A little disappointed that I got ahead of myself as I have both engine cowls painted only now to find out I need to sand out around the air intake to make a smooth transition for entering air flow. I guess I will see how I do with flowing paint for the repair. Hopefully I will not need to recoat everything.
Mitch, how is your paint job coming along? Should be getting there soon?

 

[MLock]

Paint is complete. Should have a sunny day today so I can get some good pics to post. Stay tuned.

 

[walter]

How well would an RV-14 Baffle kit fit on an RV-8 with an IO-360?

 

[rvbuilder2002]

How well would an RV-14 Baffle kit fit on an RV-8 with an IO-360?

If it is an angle valve IO-360 it would fit the engine fine, but it would probably not match up with the cowling very well (though I haven't tried it).

 

[stevep]

Paint is complete. Should have a sunny day today so I can get some good pics to post. Stay tuned.

Staying tuned Mitch.....looking forward to seeing her!