[David Burke]

I wonder if anyone could help ? I have mislaid my drawing OP-27A - I need a drawing for FF-713 spacer on a 0-320 engine Could anyone scan it to me at
[email protected] ??? It would be much appreciated!

 

[a8301]

I can fax it to you.












Bruce 9A almost there

 

[David Burke]

It would be great if you could ! Fax number 01778-348663

 

[a8301]

David the fax failed, but the specs are AS3-063X1 1/4 X12 trim to 10 23/32 X1.












Bruce

 

[a8301]

David, check your email.













Bruce 9A almost there

 

[David Burke]

Bruce - thank you very much for that ! Without wanting to be a pain is there anywhere on the OP-27 drawing that shows the exact positioning of the FF-709 oil cooler doubler on the baffle ? I am relying on the baffle drawings at the moment and sadly there isn't enough detail there for me to safely postion it ! Thanks for the email

 

[a8301]

David no pain, check email, there is no exact position.













Bruce

 

[Greg Arehart]

David,

I am at the same stage with baffles, and there is no particular place for the oil cooler - just "as high as possible" to facilitate air flow through it. But be careful not to get it too high as it will interfere with the cowling (I'm hoping mine is not too high....). I am considering adding another doubler (probably .063) on the forward right side of the cooler bracket (inside the baffles) to make sure I don't end up with vibration cracks in the baffles.

greg