boom3
Well Known Member
I have one factory punched hole on my bottom wing skin that does not line up at all with the hole in the spar. Every other hole is perfect. (I wonder if the CNC punch was hungover or something. )
If I drill it I will either figure 8 the skin or the spar hole.
If I go to a 4 size rivet I think it will be too close to the edge.
Never a shortage of things to think about.
Any suggestions?
Thanks!
If I drill it I will either figure 8 the skin or the spar hole.
If I go to a 4 size rivet I think it will be too close to the edge.
Never a shortage of things to think about.
Any suggestions?
Thanks!