DakotaHawk
Well Known Member
My AviPak Strobes suddenly quit working yesterday afternoon. I looked at the installation guide and did the few steps of troubleshooting that they offer. I'm looking for any further troubleshooting ideas before I purchase a new power supply...
So far I've...
1) Checked voltage good at 12V+ power to power supply.
2) Checked power supply 15A fuse OK
3) removed all three strobe plugs, then plugged in each strobe plug individually to see if any strobe worked independently of the others. No joy!
I have not...
1) checked the strobes on another power supply to see if all three strobes have failed simultaneously.
Any suggestions are welcome!![Confused :confused: :confused:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
So far I've...
1) Checked voltage good at 12V+ power to power supply.
2) Checked power supply 15A fuse OK
3) removed all three strobe plugs, then plugged in each strobe plug individually to see if any strobe worked independently of the others. No joy!
I have not...
1) checked the strobes on another power supply to see if all three strobes have failed simultaneously.
Any suggestions are welcome!