B

benbell4140

Well Known Member
I'm currently wiring up my NAV radio and equipment and have a few questions about the pin out diagram. Any avionics guy willing to help me by phone? It's a narco nav825 and a narco IDME891. I already know about narco's business mishaps and there reputation but that's the equipment I have and need to finish intallation so I can rivet the top forward skin on.

Thanks
 
What Are Your Questions?

If it's wiring questions, that is usually easy. I made up wiring diagrams for all my systems. I could send them to you. Not that they would work for you but it would give you an idea on how to draw it out and do your own. Once you make up a drawing of what you need the actual wiring becomes easy. If you want me to call you send me your phone number.

radiowiring.jpg


This is my radio wiring diagram. If it is too big to view in internet explorer, save it to your machine and use windows picture viewer to see it.
 
Ok, here are the two pinouts if anyone has some extra time. My question is on the NAV radio diagram they have pins that state only when 824 or 825 CDI is used. The problem is I'm using an IDME891. I'm assuming I wire it up as it shows for the 824/825 but want to be certain. Also was wondering what the remote channeling is...

Nav radio

http://www.integratedavionics.net/IAS/manuals/Narco/NAV824-825-Pinout.pdf

IDME891

http://www.integratedavionics.net/IAS/manuals/Narco/IDME 891/IDME891-Pinout.pdf

Thanks all..
 
You must log in or register to reply here.