vbpiper
Well Known Member
I am trying to drill the tip-up canopy latch lugs to the aft canopy frame. The directions say to clamp the lug to the frame, position the canopy so the lugs engage the hooks, the drill it. My problem is that I am too dense to figure out how to clamp them with the roll bar in place. The only thing I can come up with was to remove the roll bar, but then I lose the positive stop for where the canopy will rest when snugged down tight. Any and all suggestions will be gratefully accepted!
Help?
Thanks.
BTW, the fiberglass work on the front of the Plexi is kind of fun!
Ward
Help?
Thanks.
BTW, the fiberglass work on the front of the Plexi is kind of fun!
Ward